libzbc-devel-5.5.0-19.3.x86_64.rpm


Advertisement

Description

libzbc-devel - Development files for libzbc, a ZBC/ZAC disk manipulation library

Property Value
Distribution openSUSE Tumbleweed
Repository openSUSE Hardware all
Package name libzbc-devel
Package version 5.5.0
Package release 19.3
Package architecture x86_64
Package type rpm
Installed size 32.81 KB
Download size 19.89 KB
Official Mirror ftp.gwdg.de
libzbc is a simple library providing functions for manipulating Zoned
Block Command (ZBC), Zoned-device ATA command set (ZAC) disks.
This subpackage contains the files needed to build against libzbc.

Alternatives

Package Version Architecture Repository
libzbc-devel-5.5.0-19.3.i586.rpm 5.5.0 i586 openSUSE Hardware
libzbc-devel-5.3.1-1.1.i586.rpm 5.3.1 i586 openSUSE Oss
libzbc-devel-5.3.1-1.1.x86_64.rpm 5.3.1 x86_64 openSUSE Oss
libzbc-devel - - -

Requires

Name Value
/usr/bin/pkg-config -
libzbc-5_5_0 = 5.5.0

Provides

Name Value
libzbc-devel = 5.5.0-19.3
libzbc-devel(x86-64) = 5.5.0-19.3
pkgconfig(libzbc) = 5.5.0

Download

Type URL
Binary Package libzbc-devel-5.5.0-19.3.x86_64.rpm
Source Package libzbc-5.5.0-19.3.src.rpm

Install Howto

  1. Add the openSUSE Hardware repository:
    # zypper addrepo http://ftp.gwdg.de/pub/opensuse/repositories/hardware/openSUSE_Tumbleweed/ opensuse-hardware
  2. Install libzbc-devel rpm package:
    # zypper install libzbc-devel

Files

Path
/usr/include/libzbc/
/usr/include/libzbc/libzbc/zbc.h
/usr/lib64/libzbc.so
/usr/lib64/pkgconfig/libzbc.pc

Changelog

2018-03-18 - jengelh@inai.de
- Update to new upstream release 5.5.0
* Fixed various problems with the fake backend driver
(emulation mode), in particular when using a 4K sector disk
as backend storage.
* Properly set up direct I/O operation with the SG_IO interface
(SCSI and ATA backend drivers).
* Properly handle the maximum and optimal number of open zones
for drives with no limit and drives not reporting any limit.
* Skip open zone resource tests for drives with no limit or an
unreported limit on the maximum/optimal number of open zones.
* Add a new test to verify that a drive returns the correct
ASC/ASCQ sense error codes when writing to a full zone (HM
drives only).
2017-08-08 - jengelh@inai.de
- Update to new upstream release 5.3.1
* A rewrite of libzbc introducing significant changes to the
API. Support for draft standards 4.x is dropped. Compliance
to the final ZBC/ZAC standards is improved.
* All functions now operate using 512B sector units, regardless
of the device actual logical block size. This is in line with
Linux block device management and can simplify application
implementation by unifying the addressing unit used when
devices with different logical block sizes (512B or 4096B)
are being used. Applications must however still comply with
write request alignment to the device physical block size,
which may be different from the 512B sector size unit used.
* Improved read and write functions (zbc_pread and zbc_pwrite)
to not limit the request size to the device maximum request
data transfer size (calls are internally split into multiple
requests).
2016-11-29 - jengelh@inai.de
- Update to new upstream release 4.3.3
* block backend driver: support latest "official" kernel
interface queued up for kernel 4.10 release.
2016-09-29 - jengelh@inai.de
- Update to new upstream release 4.3.0
* Properly handle detection of zoned block devices using sysfs
* Fixed handling of list view so that an operation on a zone does
not reset the current selection and view whenever possible.
* Improved handling of the list view using a filter model.
* Added support for direct I/Os (O_DIRECT). Note: this does not
work with SG node device files.
* Added maximum read/write command size in the device info
structure.
* Initialize maximum device read/write I/O size for each backend
driver.
* Check read/write command size against the maximum allowed for
the device.
* Fixed get capacity: the code is now common for ATA and SCSI.
This fixes problems in SCSI backend when RC_BASIS is 0 (report
zones was being executed without the max logical sectors being
set), and also adds RC_BASIS handling for ATA drives (this was
missing entirely).
2016-07-01 - jengelh@inai.de
- Update to new upstream release 4.1.1
* This release implements support for ZBC and ZAC revision 4 and
above draft standards.
* Fixed the fake backend driver to pass all tests even if the
device specified is very small (i.e. it has only a few sequential
zones).
* Display SG_IO ioctl error message only when the log level is set
to debug/verbose.
2016-02-13 - jengelh@inai.de
- Update to new git snapshot 2.0.0.g32
* Support for ZBC and ZAC r04
* Added block device backend driver for use with kernels providing
SMR support and exposing host-managed disks as block devices.
2015-11-12 - jengelh@inai.de
- Update to new git snapshot 2.0.0~git113
* Added sense key and sense code string, DATA PROTECT and ZONE IS READ ONLY.
* Added filling sense key/sense code when reads spanning other types of zone.
* Supported storing ASC/ASCQ data on ata.
* Supported URSWRZ flag on SCSi.
* Added flags in zbc_device_info structure and stored URSWRZ flag in it.
* Added forced ata read/write flag to read/write using pass through command.
* Supported ZBC sense key, ASC/ASCQ handling.
2015-06-08 - jengelh@inai.de
- Update to new git snapshot 2.0.0~git65
* supports the ZBC standard draft Rev 02
and Rev 01 of the ZAC standard draft

See Also

Package Description
libzbc-gui-5.5.0-19.3.i586.rpm Graphical frontend for ZBC tools
libzbc-gui-5.5.0-19.3.x86_64.rpm Graphical frontend for ZBC tools
libzbc-tools-5.5.0-19.3.i586.rpm Command line utilities for ZBC/ZAC disk manipulation
libzbc-tools-5.5.0-19.3.x86_64.rpm Command line utilities for ZBC/ZAC disk manipulation
linaro-adfu-tool-0.1~git.20160322-1.23.i586.rpm Actions Device Firmware Update tool
linaro-adfu-tool-0.1~git.20160322-1.23.x86_64.rpm Actions Device Firmware Update tool
linuxconsoletools-1.5.1-15.18.i586.rpm A set of utilities for joysticks
linuxconsoletools-1.5.1-15.18.x86_64.rpm A set of utilities for joysticks
littleb-devel-0.1.2-8.10.i586.rpm Development files for littleb
littleb-devel-0.1.2-8.10.x86_64.rpm Development files for littleb
littleb-examples-0.1.2-8.10.i586.rpm Examples for littleb
littleb-examples-0.1.2-8.10.x86_64.rpm Examples for littleb
lshw-B.02.18-21.13.i586.rpm HardWare LiSter
lshw-B.02.18-21.13.x86_64.rpm HardWare LiSter
lshw-gui-B.02.18-21.13.i586.rpm HardWare LiSter (GUI Frontend)
Advertisement
Advertisement